5 Tips for Maintaining Your HVAC System

An HVAC system lasts 15 to 20 years under normal conditions but can last longer with proper care. You can prolong the life of your HVAC system by performing regular maintenance and investing a little money in upgrades.

HVAC malfunctions are every homeowner’s worst nightmare during the frigid winter or hot summers. It might be a good idea to search for heating contractors near me online, in such a situation.

Expert tips for maintaining your HVAC system to live long!

If you want your HVAC system to perform at its best, you must take some precautions to avoid problems: 

1. Replace the air filters.

Dirty filters are the most common cause of HVAC failure. Your HVAC system will be less efficient if its air filter and components are covered with dust, debris, and grime.

Moreover, a dirty air filter reduces the air quality in your home, which can activate allergies and several health issues like respiratory problems. It is best to clean the air filter monthly or invest in disposable air filters.

2. Programmable thermostats are best.

By using a programmable thermostat, you can improve the efficiency of your HVAC system. It gives you the facility to save your preferred temperature settings, and some thermostats might send alarms about declining air quality in your home. If you are interested in installing a programmable thermostat, look for HVAC service near me online, and ask them regarding installation quotes.

3. Check for air leaks.

The warm air in your home is seeping out from corners, which could cause concern. Doors, windows, kitchen vents, and similar openings are the most likely places for air to escape. The furnace works harder because the air leaks to keep your home warm. Sealing and weatherstripping around windows and doors will help conserve heat by preventing drafts or gaps in doors, windows, or external walls.

4. Open the doors and windows.

In most cases, it’s the cheapest way to reduce the strain on your furnace. Make use of natural light whenever possible. Open the curtains of your windows during the day and let the sun’s natural heat warm your home. Let the air conditioner rest for a few hours at night in summer.

Search for heating contractors near me online, and call the expert for inspection if the electricity bills are at an all-time high.

5. Clean the condensing coils

If you have a heat pump or air conditioning system, it is essential to clean the condensing coils weekly to avoid grime and dust accumulation. Condensing coils help transfer heat, making the refrigerant cooler for efficient cooling. Dust reduces the surface area for transfer, and the cooling capacity significantly decreases.

Similarly, vacuum the furnace interiors and use a brush to remove dust from the components.

Maintain your HVAC system by making an appointment

The most efficient way to extend the life of your furnace is to have it regularly tested and serviced. It is a good idea to have your furnace inspected once a year. Regularly maintaining your furnace can improve its performance and extend its lifespan. 

To find a reliable HVAC company, search for HVAC service near me. Technic Air Mechanical will help maintain your HVAC at a reasonable cost. Call us at (720) 261-0491 to learn more about our services. 

5 Things to Do Now to Avoid a Furnace Repair Later

Heating and cooling systems are essential to keeping the indoors comfortable throughout the year, even in extreme weather conditions. Whether you have an air conditioning device or a furnace, they require periodic upkeep and repairs. Contact Technic Air Mechanical for furnace repair in Aurora, CO, and sign up for a regular maintenance plan. 

Furthermore, contacting technicians for heating and cooling maintenance first might seem like a hassle, but this effort pays off in the long run. 

Tips to avoid furnace repairs in the future

Here are some tips you can follow to keep your furnace maintained and repairs at bay:

1. Change Your Filter

Replace the air filter at the beginning of the winter season. Replace it every three months or clean it monthly if it appears dirty. Dirty filters reduce airflow and make your system work harder to cool your home. It may lead to overheating, and overheating may lead to a sudden shutdown.

2. Inspect Intake And Exhaust Pipes

Regularly inspecting your furnace’s intake and exhaust pipes can also help prevent furnace repairs. Intake and exhaust pipes regulate the airflow of your house. Debris, soot, and dust can block your pipes and damage your system. The regular inspection of your intake and exhaust pipes will enable you to remove any substance inside, allowing your system to function correctly

If the issue persists, contact Technic Air Mechanical, a reputed furnace repair expert in Aurora, CO.

3. Maintain The Surroundings of Your Furnace

Cleaning the area around the furnace is another way to prevent furnace repairs. The space around your furnace should be large enough for free air circulation and to prevent any safety hazards. The presence of aerosols, clothes, and paint near your furnace can easily cause a fire. You can prevent unnecessary damage to your furnace by keeping the area around it clean.

4. Check Your Thermostat

Checking your thermostat will prevent furnace repairs in addition to inspecting your intake and exhaust pipes. Clean the thermostat regularly to ensure it works efficiently. The average lifespan of a good thermostat is around three years. Our furnace replacement expert in Aurora, CO, recommends investing in a smart thermostat to increase energy savings if you are looking for a new thermostat.

5. Inspect the Ductwork

The attic or crawl space conditions year after year can cause the duct work to deteriorate. It can hinder the duct system that delivers heating and cooling throughout your home. It is due to duct work issues when you notice hot or cold spots in your home. It is best to call our expert to inspect the duct system yearly and repair leakage or other issues.

Conclusion

Investing in HVAC maintenance is better than spending on costly repairs and replacements. That’s why annual maintenance and tune-ups can enhance your furnace system’s effectiveness and prevent major breakdowns. With this method, you can save a lot of money and energy by paying only a small sum.

You do not need furnace replacement in Aurora, CO if you annually call the technicians for maintenance. Contact Technic Air Mechanical at (720) 261-0491 and schedule an appointment for furnace maintenance today!

How To Reboot A Furnace: 3 Easy Steps To Restart Your Furnace

Whether you have a gas furnace, an oil furnace, or an electric furnace, knowing how to reset a furnace is an important skill. A reset button is usually found within the blower housing adjacent to the blower motor in almost every furnace.

Having a reset button on your furnace is an important part of your HVAC system. It is designed to shut the unit off quickly, ensuring your home is heated safely. Your furnace is likely overheating if your furnace reset button keeps tripping. There may be a need for furnace repair services in this case.  

3 Easy steps to restart your furnace

  • Change The Filters

Make sure the furnace filter is clean before doing anything. Many new HVAC models have safety mechanisms that prevent the furnace from starting if the filter is clogged. Several problems are associated with dirty air filters, including restricted airflow and poor indoor air quality. Ensure your HVAC filter is clean or replaced no more than 90 days after installation.

Follow the below steps to change a furnace filter:

  • Set the thermostat to off mode. 
  • An air filter is usually located in a furnace’s top or bottom compartment.
  • You can slide the filter out once you’ve found the access panel.
  • Place the new, clean filter in the furnace with the arrows pointing toward the airflow.
  • Make sure the access door is closed and secured.

  • Check the Pilot Light

If your furnace’s pilot light is out, it can’t ignite the spark it needs to light the boilers. In some cases, you may need to remove a panel to check if the pilot light is on, but in many cases, you can just glance inside. Having turned off your pilot light, you will need to relight it. You can relight the pilot light according to your owner’s manual instructions.

The next step is turning the furnace off and back on again after ensuring the filter is clean, and the pilot light is working. If you happen to live in Aurora, Co get in touch with Technic Air Mechanical and speak to our professional for furnace replacement.

  • Turn The Furnace Off and On 

The house’s indoor temperature should be at least five degrees lower than the thermostat’s temperature. After finding the breaker box, proceed to the next step. You need to locate the breaker for your heater and turn it off. You should make sure that your hands are completely dry before you start. If you notice damage to the breaker panel, do not use it. Contact our qualified electrician if there is any noticeable damage. 

It is also important to understand that there may be an HVAC subpanel near the outdoor unit that contains the breakers. If the system is off and rebooting, leave the breaker for at least 10 minutes. After 10 minutes, turn the HVAC breaker back on. Once your furnace has been restored to power, turn the temperature above room temperature and set your thermostat to heat mode.

If you are looking for HVAC service near me, contact Technic Air Mechanical. For any HVAC service you require, we’ll be happy to help and provide solutions. 

What Happens During A Furnace Tune-Up?

As winter draws near, it’s time to inspect your furnace. Poorly maintained furnaces pose a health risk, therefore, you must do furnace maintenance before winter arrives. This article will provide you with a checklist for furnace maintenance and walk you through the process.

Tune-up checklist

  • Replace and Inspect the Furnace Filters

It is the first item you need to inspect when preparing for winter. The filters draw in dirt, dust, and other particles that amass over time and obstruct airflow. Regular filter replacement helps prolong the life of your furnace and save your power costs since the furnace will operate more effectively.

  • Inspect the Chimney and Clean It

Chimneys may get blocked by bird nests or permit the accumulation of carbon. Cleaning chimneys will shield people from carbon monoxide poisoning by properly allowing carbon monoxide to exit the home. Contact Technic Air Mechanical for furnace repair in Aurora, CO, and have experts examine your chimneys.

  • Remove Any Impediments and Open the Vents

Any obstruction of the air vents will make the furnace work harder and raise the system’s temperature. It will place too much strain on the furnace and might make accidents more likely. A piece of furniture or equipment that is too near to the vents should be moved.

  • Clean the Furnace’s Ducts

The heating ducts require thorough cleaning and inspection. It will result in better overall air quality and, most significantly, less effort on the part of your furnace to run efficiently. Additionally, look for and remove any dents, holes, mold, or mildew in the ducts.

  • Window-Cleaning and Blind-Opening Procedures

The cheapest approach to reduce your energy use throughout the winter is to do this. To give your home a natural warmth, clean the windows and allow the sun in. It would be simpler for your furnace to warm up your home if you maximize your exposure to the sun.

  • Essentially Clean Your House

Winterizing your home is important because you’ll be spending more time there. Your home should be cleaned up, including any dust, filth, mold or mildew, debris, etc., that may have developed over time. Your time indoors will be more pleasant and peaceful as a result.

  • Set the Thermostat to a Comfortable Setting

During the winter, you will use your thermostat just as much as your furnace. Use a programmable or smart thermostat to establish the ideal temperature needed throughout the day.

  • Check Your Burners, Heat Exchangers, and Gas Connections

Gas burners or connections that aren’t properly working might put the home in danger of fire. The furnace will have to work harder than usual if the burner or heat exchanger is unclean. As a result, inspecting and replacing them as necessary is required. Have your furnace professionally tuned once a year to ensure it operates as effectively as possible. To complete your task, contact a reputable professional for furnace repair in Aurora, CO

Get your HVAC system tuned up by a pro

If you are searching online for ‘heating repair near me’, for authorized and experienced professional assistance – contact Technic Air Mechanical now to book our services! We provide the most reliable services to meet all your heating and cooling needs.

4 Things To Check If Your Furnace Stops Working

Imagine if your house’s furnace or water heater suddenly stopped working. How would you handle the situation?

There are two options available: you could try to fix it yourself or contact Technic Air Mechanical for professional furnace installation solutions in Aurora, CO. It is possible to resolve the problem within a few hours if you troubleshoot or consult an HVAC technician

Possible faults due to which a furnace stopped working

Below is a list of possible reasons why your furnace could suddenly stop working. Call the experts at Technic Air Mechanical for furnace installation solutions in Aurora, CO, to resolve the issue as soon as possible.

  • Long Time no Maintenance 

Most people find it challenging to schedule an annual furnace check-up. Even though the heating system is working perfectly fine, some people wonder why they should spend money on maintenance and check-ups. 

Spending enormous amounts of time and money on a problem that could have been easily resolved if detected in the early stages is a waste of time and money.  

  • Faulty Air Duct Vents  

There are times when hot air leaks from a tiny hole instead of warming up the room. While you might feel like the furnace isn’t working, the heating system might work perfectly. 

In this case, it is the air that leaks away. The duct network may be inadequate, and vents may wear out over time. You should seal the leaks as soon as possible if they can be found.

  • Refrigerant Levels are Down

If you have a heat pump in your home, ensure its refrigerant levels are adequate. If it stooped down, or if the compressor failed, it must have sunk. In some cases, a faulty blower capacitor can cause the furnace not to work. 

There is a certain tolerance level, and ignorance may lead to a problem with your furnace. Call the professionals and replace the faulty component with a new one.

  • Defective Thermostat  

The thermostat controls the heating system. Ensure the thermostat is switched on and the batteries are fully charged if your furnace does not start. 

There is likely a problem with the high-limit switch if it doesn’t resolve your problem. A professional from Technic Air Mechanical with experience in furnace installation in Aurora, CO, will be able to help you better

Summary

Having a furnace malfunction during winter can be a problem. An owner should keep it up-to-date to keep it working efficiently. Check whether the power switch is on or the furnace is not working, ensure that the furnace’s fuse is working properly.  

It is important to hire a quick expert if the fault is massive and takes more time than you can imagine. If you are searching for ‘HVAC service near me’ online, visit Technic Air Mechanical and call us for a fast and professionally resolved solution for your furnace problems. Contact us today to know more.